The Dell PowerEdge R660 is a 1U rack server with two Intel Xeon Gold 5415+ processors, providing 16 cores and 32 threads in total. With 768 GB of DDR5 ECC RDIMM memory, this configuration is suited to business applications and memory-intensive virtualization.
Ten 2.4 TB SAS hard drives provide 24 TB of total raw capacity. The hot-plug drives are managed by a PERC H755 SAS Front controller. Usable capacity depends on the selected RAID configuration and formatting; a configured RAID level is not specified for this offer.
iDRAC9 Enterprise 16G enables remote administration, while Broadcom 5720 LOM provides two 1GbE network ports. Dual 800 W hot-plug power supplies provide 1+1 redundancy, and ReadyRails A15 sliding rails are included. Warranty: 3 years. Available to order; price on request.
Specifications of this configuration
- Model: Dell PowerEdge R660
- Form factor: 1U rack server
- Processors: 2 × Intel Xeon Gold 5415+
- Cores and threads: 8 cores / 16 threads per processor; 16 cores / 32 threads total
- Processor frequency: 2.9 GHz base; up to 4.1 GHz maximum turbo
- Cache: 22.5 MB per processor
- Intel UPI: 16 GT/s
- Processor TDP: 150 W each
- Memory: 768 GB DDR5 ECC RDIMM: 24 × 32 GB dual-rank modules
- Module speed rating: 5600 MT/s
- CPU memory-speed limit: Up to 4400 MT/s; actual speed depends on configuration and settings
- Drive bays: Up to 10 × 2.5-inch SAS/SATA
- Installed drives: 10 × 2.4 TB SAS ISE HDD, hot-plug
- Total disk capacity: 24 TB raw, before RAID and formatting
- Drive interface: SAS 12 Gbps
- Rotational speed: 10,000 rpm
- Drive format: 2.5-inch, 512e
- Storage controller: Dell PERC H755 SAS Front
- Onboard network: Broadcom 5720 LOM, 2 × 1GbE
- Remote management: iDRAC9 Enterprise 16G
- Expansion slots: 3 × PCIe x16 Gen4, low profile; Riser Config 1
- Power supplies: 2 × 800 W MM, 1+1 redundant, hot-plug
- AC input: 100–240 V
- Rails: ReadyRails Sliding Rails A15
- Warranty: 3 years
5600 MT/s is the installed modules’ rated speed, not a claim of operating memory speed. Xeon Gold 5415+ memory controllers support DDR5 at up to 4400 MT/s. Actual speed depends on the system configuration and settings.






Reviews
There are no reviews yet.